17-Panas_sofwan_irstc

Sofwan, Agus (2015) 17-Panas_sofwan_irstc. ANALYSIS OF REQUIRED POWER IN TUBE FURNACE USING DAQ MASTER PROGRAM.

[img] Text
17-Panas_sofwan_irstc.pdf
Download (854kB)

Abstract

Abstract Analysis of power required in tube furnace using DAQ master program. The tube furnace was used to control the temperature and testing data of heating element in tube furnace with resistance of 9, 16, and 23 ohm. The efficiency of the furnace was tested by operating it with electrical voltage of 22, 27, 31, 37, 47, 80 and 100 volt to target temperature 1000 0C. Based on testing performed, first tube furnace by resistance 9 ohm couldn’t reached temperature of 1000 0C due to low electrical power, while second tube furnace by resistance 16 ohm, temperature could be reached 10000C with electric power of 338.4 watt during 5732 second and 499.5 watt during 5775 second, then for third tube furnace by resistance 23 ohm, temperature 10000C could be reached with electric power of 333 watt during 5735 second. Result testing by resistance 23 ohm has more efficient electric power at temperature 10000C. By calculating the temperature effect to resistance, resistance of heating element by 9 ohm obtained result was in range of resistance from 9.01 – 9.11 ohm, then for resistance 16 ohm was in range of resistance from 16.02–16.24 ohm, and resistance 23 ohm was in range of resistance from 23,03 – 23,34 ohm. Keywords: electrical power, tube furnace, resistance, temperature controller, DAQ master program

Item Type: Article
Subjects: L Education > L Education (General)
Depositing User: Dr._Ing. Agus Sofwan
Date Deposited: 07 Mar 2022 09:18
Last Modified: 07 Mar 2022 09:18
URI: http://repository.istn.ac.id/id/eprint/3570

Actions (login required)

View Item View Item
ISTN Repository is powered by EPrints 3 which is developed by the School of Electronics and Computer Science at the University of Southampton. More information and software credits.